M7200 Atmospheric Consistometer


  • Height: 25 in.
  • Width: 15 in.
  • Depth: 18 in.
  • Weight: 63 lbs.
  • Pressure: Atmospheric | Max Temp: 200°F

Simple and Dependable Testing
The M7200 Atmospheric Consistometer performs cement testing by conditioning cement slurry while the slurry is subjected to a desired temperature under atmospheric pressure. The slurry is placed inside API standard brass cups that rotate at 150 rpm. Slurry conditioning always plays an important role in oil well cement testing because of the critical elements within drilling, completion, and abandonment of wells. The M7200 is capable of preparing cement slurry for the testing of thickening time, free water content, fluid loss, viscosity, rheological properties and other various other properties.

The M7200 Atmospheric Consistometer minimizes operating time with the addition of two sample cups that can condition slurry at the same time. The easy-to-read dial on each cup gives a quick and clear response that shows the current consistency of the slurry.

Dual thermocouples monitor the bath temperature to provide extra protection and prevent a hazardous situation. Pre-installed copper cooling coil cools down the temperature of bath quickly at the end of the test so that time between tests reduces significantly.

The hardware design makes the M7200 easy to set up, use, and clean. All hardware components are created in accordance with API recommendations. The slurry cup lid (or cap) has a direct torque spring readout which is shown on the lid. The readout should be multiplied by 10 to determine the consistency in Bearden Units (Bc).

Maximum Temperature: Up to 200°F
Maximum Pressure: Atmospheric
Consistency Range: 0-100 Bearden Units
Slurry Cup Rotation: 150 rpm
Heater Power: 1,500 W
Voltage: 220-240V AC
Power: 1,500 W
Frequency: 50/60 Hz
Compliances: API Spec 10A/ISO 10426-1
Dimensions: 25" H x 15" W x 18" D
Weight: 63 lbs.
  • Reliable overtemperature protection.
  • Easy-to-use PID temperature controller.
  • Efficient operation with dual rotating cups.
  • Stainless-steel bath.
  • Time saver—fast cooling with cooling coil.
  • API compliant instrument design.
Downloads for the M7200 Atmospheric Consistometer: